• 17-18th April 2018. Kursaal, San Sebastian - Spain
cabecera

Programme

Programme at a glance.

Last version 17th April 2018

Download the programme

Tuesday, 17 APR
09:00-09:30 Registration
ROOM 1
09:30-09:35 Official Opening
09:35-10:45 Keynote
ROOM 1
Tool materials, design and performance; coatings and tool wear
ROOM 2
Machining of difficult to cut materials
ROOM 3
High performance machining; machinability after additive manufacturing
10:45-11:15 Coffee Break Coffee Break Coffee Break
11:15-12:55 Oral Session Oral Session Oral Session
13:00-14:00 Lunch Lunch Lunch
14:00-15:40 Oral Session Oral Session Oral Session
15:40-16:00 Coffee Break Coffee Break Coffee Break
16:00-17:40 Oral Session Oral Session Oral Session
20:30- Official Dinner
Araeta Restaurant
Wednesday, 18 APR
ROOM 1 ROOM 2 ROOM 3
09:00-09:25 Keynote Keynote Keynote
ROOM 1
Intelligent machine tools
ROOM 2
Dynamics, stability, testing in machining; robots for machining
ROOM 3
Numerical modelling, sustainability and cryogenic machining
09:25-10:45 Oral Session Oral Session Oral Session
10:45-11:15 Coffee Break Coffee Break Coffee Break
11:15-12:55 Oral Session Oral Session Oral Session
13:00-14:00 Lunch Lunch Lunch
ROOM 1
14:00-15:30 Industrial Session - Part 1
15:30-16:00 Coffee Break Coffee Break Coffee Break
16:00-17:30 Industrial Session - Part 2
17:30- Official Closing
Thursday, 19 APR
ELGOIBAR AND EIBAR
08:15-15:00 Technical visit to IK4-IDEKO and IK4-TEKNIKER

Tuesday, 17 APR
09:00-09:30 Registration
09:30-09:35 Official Opening
Dr. Luis URIARTE, Chairman of the XIVth International Conference on High Speed Machining
09:35-10:45 Opening Session - ROOM 1
09:35-09:45

Basque Government introduction

Estibaliz HERNÁEZ
Eusko Jaurlaritza / Gobierno Vasco
09:45-10:15

The Basque Machine Tool Industry: evaluation and challenges

Antxon LÓPEZ USOZ
Danobat Group
10:15-10:45

Industrie 4.0 - Introduction, challenges and chances for cutting industry

Eberhard ABELE , A. BRETZ , J. METTERNICH , A. WANK -
Institute of Production Management, Technology and Machine Tools (PTW)
11:15-12:55 Tool materials, design and performance; coatings and tool wear - ROOM 1
Chairperson: Eberhard ABELE
11:15-11:35

Lifetime of HiPiMS TiALcoated and pico second Laser structured cemented carbide turning tools

Georg WÄLDER , Raymond CONSTANTIN
Hepia, HE ARC
11:35-11:55

Investigation on the effect of cutting geometry on tool life in drilling Inconel 718

Saeed ASGHARI , Nick READE , Chris WANDS , Alborz SHOKRANI
University of Bath , Scorpion Tooling UK Ltd.
11:55-12:15

Influence of cutting edge micro geometry on polycrystalline diamond micro milling of silicon

Yigit KARPAT , Samad Nadimi Bavil OLIAEI
Bilkent University, Atilim University
12:15-12:35

Machining of iron-carbon alloys by the use of PCD cutting inserts with additional internal cooling

Manuel REITER , Jens BRIER , Friedrich BLEICHER
TU Wien, IFT - Institute for Production Engineering and Laser Technology
12:35-12:55

A pragmatic approach to high speed circular sawing

Daniel ALBRECHT , Konstantin DREWLE , TIM OCHS , Hans-christian MÖHRING
University of Stuttgart - Institute for Machine Tools, Ott & Heugel GmbH
14:00-15:40 Tool materials, design and performance; coatings and tool wear - ROOM 1
Chairperson: Javier GARCÍA
14:00-14:20

Influence of high <0001> textured a-alumina coatings on the crater wear resistance when turning 100CrMo7-3 steel

Irantzu SACRISTAN PEREZ , Jan ENGQVIST , Susanne NORGREN , Åke ÖSTLUND
AB SANDVIK COROMANT
14:20-14:40

Increase in cutting speed and tool life when turning structural steels through use of multilayered composite nano-structured coatings

Alexey VERESCHAKA , Gaik OGANIAN , Catherine SOTOVA
MSTU STANKIN
14:40-15:00

Development of an accurate data-driven model for predicting tool wear in high speed milling of Ti-6Al-4V for smart manufacturing under Industry 4.0

Kunal TIWARI , Arunachalam N , Ameer SHAIK
Indian Institute of Technology Madras
15:00-15:20

High efficient hard machining with new and innovative monolithic CBN end mills

Udo ECKERT , Jörg SCHNEIDER , Jan EDELMANN , Matthias PUTZ
Fraunhofer Institute for Machine Tools and Forming Technology IWU
15:20-15:40

A methodology for the design of chip breakers for PCD tools based on FEM

Itxaso CASCÓN , Jon Ander SARASUA , Ahmed ELKASEER
IK4-TEKNIKER
16:00-17:40 Tool materials, design and performance; coatings and tool wear - ROOM 1
Chairperson: Iban ARRIOLA
16:00-16:20

Modification of wear resistance for CVD a-Al2O3/TiCN coated tools with wet micro-blasting

Canyu LIU , Zhanqiang LIU , Bing WANG
School of Mechanical Engineering, Shandong University
16:20-16:40

Performances of AlCrN coating for micro-ball-end milling of pre-sintered 5Y-TZP

Franck MARQUES , Michael FONTAINE , Alexandre GILBIN , Bérenger ESCOLLE , Philippe PICART
Univ. Bourgogne Franche-Comté, FEMTO-ST Institute CNRS/UFC/ENSMM/UTBM, Dept. of Applied Mechanics, Univ. Bourgogne Granche-Comté, FEMTO-ST Institute CNRS/UFC/ENSMM/UTBM, Dept. of Applied Mechanics
16:40-17:00

Effect of cutting edges preparation using micro shot blasting on the life of uncoated milling carbide tools

Mohammadreza SOLTANI , Mohammadamin ESMAEILI , A. HAJALIAKBARI
MAPNA Turbine Engineering and Manufacturing Company (TUGA)
17:00-17:20

The evolution and thermal barrier effects of (Ti,Al)N coating on residual stresses in turning Inconel 718

Jinfu ZHAO , Zhanqiang LIU , Xin WANG , Bing WANG
Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE
17:20-17:40

A comparative study between internal and external signals for tool wear detection in drilling processes

Aitor DUO ZUBIAURRE, Rosa BASAGOITI-ASTIGARRAGA , Pedro ARRAZOLA-ARRIOLA , Javier APERRIVAY-ZUBIA
Mondragon unibertsitatea
11:15-12:55 Machining of difficult to cut materials - ROOM 2
Chairperson: Xabier MAIDAGAN
11:15-11:35

Wear development in machining of titanium alloys (Ti6Al4V and Ti5553) with specific designed Carbide substrate

Ibrahim SADIK
Sandvik Coromant AB
11:35-11:55

Development of a new forced cooling technology using a high pressure coolant for machining difficult-to-machine materials

Tanabe IKUO , HOSHINO HIDEO
Nagaoka University of Technology
11:55-12:15

Investigating the machinability of austempered grey cast iron (AGI) in turning operations

Sven LUNG , Fritz KLOCKE , Benjamin DÖBBELER
Laboratory for Machine Tools and Production Engineering (WZL) of RWTH Aachen University
12:35-12:55

Study of specific energy in grinding of tungsten carbide

Mohammadali KADIVAR , Amir DANESHI , Bahman AZARHOUSHANG
Institute for Precisioin Machining (KSF), Furtwangen University of Applied Sciences
14:00-15:40 Machining of difficult to cut materials - ROOM 2
Chairperson: Petr KOLAR
14:20-14:40

Influencing the properties of the generated surface by modified cutting edge geometries in side milling of aluminium matrix composites (AMCs) using MCD tipped tools

Benjamin CLAUß , Andreas NESTLER , Andreas SCHUBERT
Chemnitz University of Technology
14:40-15:00

Influence of the tool geometry on the machining quality of combined continuous-discontinuous carbon fiber reinforced polymers

Anton HELFRICH , Frederik ZANGER , Volker SCHULZE
Karlsruhe Institute of Technology - Institute of Production Science
15:00-15:20

Cutting parameters influence on tool wear and surface roughness in tool steel H13 micro-milled channels

Cínthia SOARES MANSO, Cleiton Lazaro Fazolo DE ASSIS , Luciana Wasnievski da Silva de Luca RAMOS , Erik Gustavo DEL CONTE
Universidade Federal do ABC - UFABC, Instituto Federal de São Paulo - IFSP, Instituto de Pesquisas Tecnológicas - IPT
15:20-15:40

Analysis of tool life and tool wear mechanism in high speed turning of Inconel 718 with PCBN tools.

Diego INFANTE GARCÍA, Jose DÍAZ ÁLVAREZ, Jose Luis CANTERO , Maria Henar MIGUÉLEZ
Department of Mechanical Engineering, University Carlos III Madrid, Department of Bioengineering and Aerospace Engineering, University Carlos III Madrid
16:00-17:40 Machining of difficult to cut materials - ROOM 2
Chairperson: Lukas NOVOTNY
16:00-16:20

Hybrid cryogenic MQL high speed machining of Ti-6Al-4V alloy

Alborz SHOKRANI , Vimal DHOKIA , Stephen T NEWMAN
University of Bath
16:20-16:40

Investigation on Mechanical properties and microstructural variations of machined Inconel 718 by Selective Laser Melting (SLM)

Sasidharan PERIANE , Arnaud DUCHOSAL , Antoine MORANDEAU , Sébastien VAUDREUIL , René LEROY
Université François Rabelais Tours, CEROC, Université Euromed de Fès
16:40-17:00

On Machinability of Titanium Grade 2 under Minimum Quantity Lubrication Assisted High Speed Machining

Thabo Nelson MATHONSI , Rudolph F LAUBSCHER , Kapil GUPTA , Terence MILLER
University of Johannesburg (Mechanical Engineering Science), University of Johannesburg (Mechanical & Industrial Engineering Technology)
17:00-17:20

Influence of fiber cutting angle on the tool loads during drilling of CFRP

Matthias PUTZ , Martin DIX , Konstantin SAUER
Chemnitz University of Technology, Institute for Machine Tools and Production Processes
17:20-17:40

Investigation of cutting tool edge microgeometry on surface residual stress in turning In718 by finite element simulation

Qi SHEN , Zhanqiang LIU , Xiaojun LI , Xiaoping REN
Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, b Key National Demonstration Center for Experimental Mechanical Engineering Education
11:15-12:55 High performance machining; machinability after additive manufacturing - ROOM 3
Chairperson: Luis Norberto LOPEZ DE LACALLE
11:15-11:35

Modelling of cutting energy consumption for chip formation process during high speed machining of Ti6Al4V

Bing WANG , Zhanqiang LIU
School of Mechanical Engineering, Shandong University
11:35-11:55

Metalworking Fluid Performance in Aluminum High Speed Machining

J. J. HOOIJMAN
Quaker Chemical B.V.
11:55-12:15

Global approach to IBR manufacturing process with Super Abrassive Machining.

Haizea GONZÁLEZ BARRIO, Amaia CALLEJA , Naiara ORTEGA , Michael BARTON , Octavio Manuel PEREIRA NETO, Luis Norberto LOPEZ DE LACALLE
Basque Country University, Basque centre for applied mathematics
12:15-12:35

Modal couple effect on milling stability of thin-walled component

Qinghua SONG , Jian GAO , Zhanqiang LIU , Bing WANG
School of Mechanical Engineering
12:35-12:55

Kinematically coupled Force Compensation – experimental results for the 1D-implementation

Marcel MERX , Jens MÜLLER , Christoph PEUKERT , Steffen IHLENFELDT
Institute for Machine tools and Control Engineering, Technische Universität Dresden
14:00-15:40 High performance machining; machinability after additive manufacturing - ROOM 3
Chairperson: Alain D'ACUNTO
14:00-14:20

Build direction impacting surface roughness on laser sintering of maraging steel 300

Claire MOREL , Vitor CIOCA , Sylvain LAVERNHE , André Luiz JARDINI , Erik Gustavo DEL CONTE
ENS Cachan, Universidade Feredal do ABC - UFABC, Universidade Estadual de Campinas - UNICAMP
14:20-14:40

Application of cryogenic carbon dioxide in machining of CGI using an additively manufactured turning tool

Thomas HEEP , Eberhard ABELE
PTW, TU Darmstadt
14:40-15:00

Tribological behaviour of Ti6Al4V produced by Electron Beam Melting and Selective Laser Melting processes

Samuel MILTON , Antoine MORANDEAU , Florent CHALON , René LEROY
Sandvik Coromant, CEROC - Centre d’Etude et de Recherche sur les Outils Coupants, Université François-Rabelais
15:00-15:20

Residual stresses when finish turning of Ti6Al4V skin produced by SLM

Gael LE COZ , Romain PIQUARD , Alain D'ACUNTO , denis BOUSCAUD , Marie FISCHER , Pascal LAHEURTE
LEM3 Université de Lorraine, LEM3 Arts et Métiers
15:20-15:40

Lean study of the CAM Programmer role during the CAM Programming Process

Ana Esther BONILLA HERNÁNDEZ, Tomas BENO
GKN Aerospace Engine Systems AB, University West, PTC
16:00-17:20 High performance machining; machinability after additive manufacturing - ROOM 3
Chairperson: Ning HE
16:00-16:20

Multi Criteria Assessment of Machining Processes for Turbine Disc Slotting

Fritz KLOCKE , Martin SEIMANN , Marvin BINDER , Benjamin DOEBBELER
WZL of RWTH Aachen University
16:20-16:40

Metallurgical analysis of chip forming process when machining high strength bainitic steels

Fares Haddad HADDAD , Christophe LESCALIER , Olivier Bomont BOMONT , Anne Bomont-Arzur BOMONT ARZUR, Jean-Edouard Desaigues DESAIGUES
Arts et Métiers ParisTech, ArcelorMittal Global R&D Long Products - Bars & Wires
16:40-17:00

Research on the Performance of PCD Radius End Mill in Ductile Milling of Engineering Ceramics with Large Cutting Parameters

Rong BIAN , Ning HE , Wenzheng DING , Juan MU , Junming HOU
Nanjing Institute of Technology, China, Nanjing University of Aeronautics & Astronautics, Nanjing Institute of Technology
17:00-17:20

Layer Material Removal Optimisation for Residual Stress Relief

Ravi BILKHU , S. AYVAR-SOBERANIS , C. PINNA , J. CASTLE
The Advanced Manufacturing Research Centre with Boeing (AMRC), Department of Mechanical Engineering, University of Sheffield, Boeing Research & Technology

Wednesday, 18 APR
09:00-09:25 Keynote - ROOM 1
Chairperson: Ana ARANZABE
09:00-09:25

Machine Tool: From the Digital-Twin to the Cyber-Physical System

Mikel ARMENDIA , Aitor ALZAGA
IK4-TEKNIKER
09:25-10:45 Intelligent machine tools - ROOM 1
Chairperson: Mikel ARMENDIA
09:25-09:45

Intelligent machine tool for self-optimizing processes

Xavier BEUDAERT , Iñigo BEDIAGA , Jon ARGANDOÑA , Jérôme LOC’H , Jokin MUÑOA
IK4-Ideko, Dynamics and Control, IK4-Ideko, ICT and automation
09:45-10:05

Integration of Process Monitoring Data into CAM Simulation

Denys PLAKHOTNIK , Luke BERGLIND , Marc STAUTNER , Dirk EUHUS , Erdem OZTURK , Tobias FUERTJES , Yavuz MURTEZAOGLU
ModuleWorks GmbH, AMRC with Boeing at University of Sheffield, MARPOSS Monitoring Solutions GmbH
10:05-10:25

A Kalman-Filter-based Disaggregation Approach for Sensor Reduced Energy Monitoring on Component Level of Machine Tools

Dominik FLUM , Thomas WEBER , Niklas PANTEN ,
PTW TU-Darmstadt
10:25-10:45

Effects of a chip breaking system using machine drive oscillations

Xavier BEUDAERT , Iñigo LLANOS , Iñigo BEDIAGA , Jokin MUÑOA
IK4-Ideko, Dynamics and Control, IK4-Ideko, Manufacturing processes
11:15-12:55 Intelligent machine tools - ROOM 1
Chairperson: Xavier BEUDAERT
11:15-11:35

Dynamic parameters of a machining centre with composite supporting structure

Dominik HERMANSKY , Jiri MAREK , Petr BLECHA
Brno University of Technology
11:35-11:55

Thermal behaviour of a machining centre bed from composite material

Dominik HERMANSKY , Jiri MAREK , Petr BLECHA
Brno University of Technology
11:55-12:15

Topological optimization design for additive manufacturing, taking into account flexion and vibrations during machining post processing.

Vincent BENOIST , Lionel ARNAUD , Maher BAILI , Jean-Pierre FAYE
Laboratoire de Génie de Production, Ecole Nationale d'Ingénieurs de Tarbes
12:35-12:55

Online Compensation of Tool Deflection in Milling Operations by Feeling Machine Tools

Haythem BOUJNAH , Berend DENKENA , Benjamin BERGMANN
Leibniz Universität Hannover, Institute of Production Engineering and Machine Tools (IFW)
14:00-15:30 Industrial Session_1 - ROOM 1
Chairperson: Luis URIARTE
14:00-14:20

Ik4-IDEKO + IK4-TEKNIKER: R&D agenda in Advanced Manufacturing

Rafael LIZARRALDE
Ik4 - Ideko
14:20-14:50

Chinese machine tool industry: yesterday, today and tomorrow

Dr. Ömer Sahin GANIYUSUFOGLU
Symg - Shenyang Machine Tool (group) Co.,ltd.
14:50-15:10

High Speed Machining in AERNNOVA Metallic Components Advanced manufacturing

Rafael SÁNCHEZ -
Aernnova
15:10-15:30

High Speed Spindles: current status and trends

Iban ARRIOLA
IK4-TEKNIKER
16:00-17:30 Industrial Session_2 - ROOM 1
Chairperson: Jokin MUÑOA
16:00-16:20

Machine Tool vision: the challenges in grinding technologies

Imanol LANDETA
Danobat
16:20-16:50

New challenges for manufacturing in aeroturbines

Iñaki DÍAZ
ITP
16:50-17:10

Finding balance between product design and process engineering mindsets

Alberto SOTOMAYOR
Ibermatica
17:10-17:30

EUREKA SMART cluster: enabling Industry-driven R&D projects

Joseba BILBATUA
Smart Eureka Advanced Manufacturing
09:00-09:25 Keynote - ROOM 2
Chairperson: Jokin MUÑOA
09:00-09:25

Damping in machine tool structures

Lukas NOVOTNY
Czech Technical Universtiy In Prague, Faculty Of Mechanical Engineering
09:25-10:45 Dynamics, stability, testing in machining; robots for machining - ROOM 2
Chairperson: Jokin MUÑOA
09:25-09:45

A new approach in evaluating methods for the compensation of structural, load dependent deflections in machine tools

Guido PFEIFFER , Eberhard ABELE
Institut für Produktionsmanagement, Technologie und Werkzeugmaschinen (PTW)
09:45-10:05

Rapid experimental determination of stability boundaries in milling

Christian BRECHER , Prateek CHAVAN , Alexander EPPLE
Laboratory for Machine Tools and Production Engineering (WZL) of RWTH Aachen University
10:05-10:25

Development of a chatter detection methodology for variable spindle speed milling

Paolo ALBERTELLI , Luca BRAGHIERI , Mattia TORTA , Michele MONNO
Politecnico di Milano, Mechanical Engineering Department, Consorzio MUSP
10:25-10:45

Development of stability lobe diagram using receptance coupling substructure analysis of a complete machine tool structure and joints

Harshad SONAWANE , Venu GOPAL K, Manjunath MUDRANGOUDRA M, Ashok BADHE
Dr. Kalam Center for Innovation, Bharat Fritz Werner (BFW), BMS College of Engineering
11:15-12:55 Dynamics, stability, testing in machining; robots for machining - ROOM 2
Chairperson: Matej SULITKA
11:15-11:35

Experimental analysis of whirling vibrations and machined hole shape in drilling with and without pilot hole

Amaia JIMÉNEZ , Miguel ARIZMENDI , Wilmer E. CUMBICUS
Universidad de Navarra, TECNUN Escuela de Ingenieros
11:35-11:55

Study on machine tool spindle shaft dynamics considering the effect of mass of two balancing discs

Shashikumar M M , Siddesh K B , Ramesh ARALAGUPPI HOLEBASAPPA, Ashok N BADHE
Bharat Fritz Werner Ltd., Bangalore Institute of Technology
12:15-12:35

Model-based Accuracy Improvement of Milling Robots

Florian SCHNÖS , Michael F. ZÄH
Institute for Machine Tools and Industrial Management, Technical University of Munich
12:35-12:55

Robot kinematics oriented tool axis selection for robotic 5-axis milling

Ömer Faruk SAPMAZ , Lutfi Taner TUNC
Composite Technologies Center of Excellence, Faculty of Engineering and Natural Sciences, Sabanci University
09:00-09:25 Keynote - ROOM 3
Chairperson: Luis URIARTE
09:00-09:25

Surface Integrity in machined surfaces: modelling and experimental approaches

Pedro ARRAZOLA ARRIOLA
Mondragón University
09:25-10:45 Numerical modelling, sustainability and cryogenic machining. - ROOM 3
Chairperson: Alejandro SANDÁ
09:25-09:45

Microstructure-based material modelling for cutting simulation of two gear steels

Mustapha ABOURIDOUANE , Gottfried LASCHET , Viktor KRIPAK , Jens DIERDORF , Ulrich PRAHL , Fritz KLOCKE
Laboratory for Machine Tools and Production Engineering (WZL), RWTH Aachen University, Germany, ACCESS e.V., RWTH Aachen University, Germany, Steel Institute (IEHK), RWTH Aachen University, Germany, Institute of Metal Forming (IBF), RWTH Aachen University, Germany
09:45-10:05

Force model identification in milling – an algorithmic study

Max SCHWENZER , Thomas AUERBACH , Benjamin DÖBBELER , Fritz KLOCKE
Laboratory for Machine Tools and Production Engineering, RWTH Aachen University
10:05-10:25

Development of the transient temperature field within tools during several milling cycles by means of FEM

Andreas W. NEMETZ , Werner DAVES , Thomas KLÜNSNER , Werner ECKER , Christoph CZETTL , Jonathan SCHÄFER
Materials Center Leoben Forschung GmbH, Ceratizit Austria GmbH
10:25-10:45

FVPM simulation of a single-particule scratching surface topography

Charly EUZENAT , Sylvain LAVERNHE , Christophe TOURNIER
LURPA
11:15-12:35 Numerical modelling, sustainability and cryogenic machining. - ROOM 3
Chairperson: Dr. Ömer Sahin GANIYUSUFOGLU
11:35-11:55

Recent advances in simulation of flow in Cryogenic cooling for hard to cut materials

Ehsanallah TAHMASEBI , Paolo ALBERTELLI , Tommaso LUCCHINI , Michele MONNO
Consorzio MUSP, Politecnico di Milano
11:55-12:15

Development of a cryogenic machining device for milling operations

David FERNANDEZ RODRIGUEZ, Alejandro SANDÁ VERDE
IK4 Tekniker
12:15-12:35

Experimental investigation of Minimum quantity lubrication cooling (MQCL) turning machining- the trade-offs between energy, product quality, and production rate

Aqib Mashood KHAN , Jamil JAMIL MUHAMMAD, Ning HE , Liang LI
Nanjing University of Aeronautics and Astronautics NUAA
17:30- Official Closing - ROOM 1
Antton TOMASENA, General Director of economic promotion of Gipuzkoa Provincial Council

Gold Sponsor

Bronze Sponsor

Public support

Partners

subscribe to our newsletter